background image

Major Safety Precautions

1-4

Maintaining the Correct Posture when Using this Product 

Be careful that adaptor should not be in contact 
with water and therefore not be wet. 

This may cause a malfunction, electric 
shock or fire. Do not use adaptor by the 
waterside or outside particularly when it 
rains or snows. Be careful that adaptor 
should not be wet while cleaning floor with 
water.

Watching the product from too close a distance 
continuously may damage your eyesight.

Avoid using a humidifier or cooker near the 
product.

Otherwise, it may result in electric shock or 
fire.

It is important to give your eyes some rest (5 
minutes every hour) when viewing the product 
screen for long periods of time.

This will alleviate any eye strain.

Since the display panel is hot after using it for a 
long time, do not touch the product.

Keep small accessories away from the children.

Take care when adjusting the angle of the 
product or the height of the stand.

If your hand or finger is caught, you may be 
injured.

If the product is tilted excessively, the 
product may fall and this may result in 
injury.

Avoid placing a heavy object over the product.

Otherwise, it may result in a problem with 
the product or injury.

Maintain the correct posture when using this product.

Straighten your back.

Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and 
face the screen forwards.

Adjust the angle of the product so that light is not reflected onto the screen.

Keep your elbow at a right angle and keep your arm level with the back of your hand.

Keep your elbow at a right angle.

Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or 
higher and maintain the position of your arm so that your arm is below your heart.

Summary of Contents for SyncMaster S19B150N














































Reviews: