background image

Major Safety Precautions

1-3

 Caution

When thunder or lighting occurs, unplug the 
power cord and under no circumstance 
touch the antenna cable as this is danger-
ous.

Otherwise, it may result in electric shock 
or fire.

Avoid dropping an object over the product 
or cause impact to the product.

Otherwise, it may result in electric shock 
or fire.

Avoid moving the product by pulling the 
power cord or antenna cable.

Otherwise, it may result in electric 
shock, fire or a problem with the product 
due to damage to the cable.

When a gas leak occurs, do not touch the 
product or the power plug and ventilate 
immediately.

A spark may result in an explosion or 
fire.

During a thunder or lighting storm, do 
not touch the power cord or antenna 
cable.

Avoid lifting up or move the product by hold-
ing only the power cord or signal cable.

Otherwise, it may result in electric 
shock, fire or a problem with the product 
due to damage to the cable.

Avoid using or placing inflammable spray or 
objects near the product.

This may result in an explosion or fire.

Take care not to block the vent by a table 
cloth or curtain.

Otherwise, it may result in fire due to 
internal overheating.

Avoid inserting metal objects such as a 
chopsticks, coins or hairpins, or inflamma-
ble objects into the product (the vents, 
ports, etc).

If water or an alien substance enters the 
product, turn the power off, unplug the 
power cord and contact a service center.

Otherwise, it may result in a problem 
with the product, electric shock or fire.

Avoid placing a liquid container such as a 
vase, flowerpot, beverage, cosmetics or 
drugs, or a metal object over the product.

If water or an alien substance enters the 
product, turn the power off, unplug the 
power cord and contact a  service 
center.

Otherwise, it may result in a problem 
with the product, electric shock or fire.

Displaying a still image for a long time may 
create a persistent image or stain on the 
screen.

If you do not use the product for a long time, 
use the power-saving mode or set the 
screensaver to the moving picture mode.

When not using the product for a long time 
such as leaving your home, unplug the power 
cord from the wall outlet.

Otherwise, it may cause dust accumulation 
and result in fire caused by overheating or 
short circuit or result in an electric shock.

Set the appropriate resolution and frequency 
for the product.

Otherwise, it may result in eye strain.

Avoid turning the product upside down or move 
the product holding only the stand.

This may cause the product to fall resulting 
in damage to the product or injury.

Watching the product from too close a distance 
continuously may damage your eyesight.

Avoid using a humidifier or cooker near the 
product.

Otherwise, it may result in electric shock 
or fire.

Summary of Contents for SyncMaster P1980ER














































Reviews: