Samsung SyncMaster 650MP-2 User Manual Download Page 69

Page: 69 / 115

→

ENTER

The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and

"Custom") that are preset at the factory.

Dynamic, Standard, Movie, or Custom can be activated.

1. Dynamic

2. Standard

3. Movie

4. Custom

Note

Not available when Dynamic Contrast is set to On.

Custom

By using the on-screen menus, the contrast and brightness can be changed to your personal

preference.

→

ENTER

→

ENTER

→

Note

Not available when Dynamic Contrast is set to On.

Contrast

→

ENTER

→

ENTER

→

ENTER

→

ENTER

Adjusts the Contrast.

Brightness

→

ENTER

→

ENTER

→

ENTER

→

ENTER

Adjusts the Brightness.

Adjusting the LCD Display

Summary of Contents for SyncMaster 650MP-2




















































































































Search results

Summary of Contents for SyncMaster 650MP-2

Reviews:

Related manuals for SyncMaster 650MP-2

Brands by name

Popular brands

Samsung SyncMaster 650MP-2, User Manual

Search results

Summary of Contents for SyncMaster 650MP-2

Reviews:

Related manuals for SyncMaster 650MP-2

Brands by name

Popular brands