manualshive.com logo in svg

Samsung SyncMaster 400CX-2, User Manual

Share
Download
Samsung SyncMaster 400CX-2 User Manual Download Page 76

3.

Text

Normal brightness

For documents or works involving heavy text.

4.

Custom

Although  the  values  are  carefully  chosen  by  our  engineers,  the  pre-configured
values may not be comfortable to your eyes depending on your taste.

If this is the case, adjust the brightness and contrast by using the OSD menu.

Custom 

By using the on-screen menus, the contrast and brightness can be changed to your
personal preference.

MENU →   → ENTER → 

 →   → ENTER → 

(Not available in Dynamic Contrast mode of On.)

 Note

By adjusting the picture using the Custom function, MagicBright will change to Cus-
tom mode.

Contrast

MENU →   → ENTER → 

 →   → ENTER → 

→ ENTER→ 

→  ,   → ENTER

Adjusts the Contrast.

Brightness

MENU  →    →  ENTER  → 

  →    →  ENTER  → 

  →    →  ENTER  →

→  ,   → ENTER

Adjusts the Brightness.

Sharpness

MENU →   → ENTER → 

 →   → ENTER → 

 →   →   → ENTER →

→  ,   → ENTER

Adjusts the Sharpness.

Adjusting the LCD Display

53

Summary of Contents for SyncMaster 400CX-2
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands