manualshive.com logo in svg

Samsung SyncMaster 400CX-2, User Manual

Share
Download
Samsung SyncMaster 400CX-2 User Manual Download Page 115

This is an auxiliary audio function that provides an additional audio track for visually
challenged  persons.  This  function  handles  the  Audio  Stream  for  the  AD  (Audio  De-
scription), when it is sent along with the Main audio from the broadcaster. Users can
turn the Audio Description On or Off and control the volume.

Audio Description

Turn the audio description function on or off.

Volume

You can adjust the audio description volume.

 Note

Volume is active when Audio Description is set to On.

While viewing a Digital channel, this function can be selected.

Channel

 Note

The default setting may be different depending on the selected Input Mode (input signal
source selected in External Input List) and the selected resolution.

Country

Select the country in which the product is being used before you use the Auto Store
feature. If you do not see your country in the list, select Others.

Digital Channel

You can change the country for digital channels.

Analogue Channel

You can change the country for analogue channels.

 Note

The PIN number input screen appears. Enter your 4 digit PIN number.

Auto Store

Adjusting the LCD Display

92

Summary of Contents for SyncMaster 400CX-2
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands