Samsung SyncMaster 2494HM User Manual Download Page 12

Page: 12 / 96

Note

• USB cable is only provided when the stand type is HAS-USB or SIMPLE-USB.

• Cable holding ring is only provided when the stand type is SIMPLE or SIMPLE-USB.

Your Monitor

Initial Settings

Select the language using the up or down key.

The displayed content will disappear after 40 seconds.

Turn the power button off and on. It will be displayed again.

It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before

reaching the maximum count.

Note

The resolution displayed on the screen is the optimal resolution for this product.

Adjust your PC resolution so that it is the same as the optimal resolution for this product.

Front

Note

Touch them lightly with your fingers to use them.

Introduction

Summary of Contents for SyncMaster 2494HM

































































































Search results

Summary of Contents for SyncMaster 2494HM

Reviews:

Related manuals for SyncMaster 2494HM

Brands by name

Popular brands

Samsung SyncMaster 2494HM, User Manual

Search results

Summary of Contents for SyncMaster 2494HM

Reviews:

Related manuals for SyncMaster 2494HM

Brands by name

Popular brands