This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in
your computer. Use a software utility installed on your computer to set up this feature.
State
Normal Operation
Power saving mode
Power off
(Power button OFF)
EPA/ENERGY 2000
Power Indicator
Blue
Blue blinking
Off
Power Consumption
Less than 55 watts
Less than
1 watts
Less than
1 watts
This monitor is EPA ENERGY STAR
®
compliant and ENERGY2000
compliant when used with a computer equipped with VESA DPM
functionality.
As an ENERGY STAR
®
Partner, SAMSUNG has determined that this
product meets the ENERGY STAR
®
guidelines for energy efficiency.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Table 1. Preset Timing Modes
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM. 640 x 350
31.469
70.086
25.175
+/-
IBM. 640 x 480
31.469
59.940
25.175
-/-
IBM. 720 x 400
31.469
70.087
28.322
-/+
MAC. 640 x 480
35.000
66.667
30.240
-/-
MAC. 832 x 624
49.726
74.551
57.284
-/-
MAC. 1152 x 870
68.681
75.062
100.000
-/-
VESA. 640 x 480
31.469
59.940
25.175
-/-
VESA. 640 x 480
37.861
72.809
31.500
-/-
VESA. 640 x 480
37.500
75.000
31.500
-/-
