Samsung SyncMaster 210P PLUS, User Manual

Page: 19 / 53

Microsoft
®
Windows
®
98 Operating System
1. Click " Start " , " Setting " , " Control Panel ".
2. Double click " Display " icon.
3. Select the " Settings " tab and click " Advanced Properties " button.
4. Select the " Monitor " tab.
5. Click the " Change " button in the " Monitor Type " area then click " Next " button.
6. Choose " Display a list of all the driver.. " then click " Next " button.
7. Click the " Have Disk " button, then click " browse.. " button.
8. Specify A:\(D:\driver) then click " OK " button.
9. The " Select Device " dialogue box will appear. Select " Show all devices " then choose the
monitor that corresponds to the one you connected to your computer and click OK.
10. Continue choosing " Close " button and " O.K " button until you close the Display Properties
dialogue box.
Microsoft
®
Windows
®
95 Operating System
First determine the Windows 95 version installed on your computer by right-clicking the My
Computer icon on PC and selecting Properties. The version number is listed under System.
Perform the steps for the appropriate version.
Version 4.00.950A
1. Click Start , Settings , Control Panel , and then double-click " Display " icon.
2. In the " Display Properties " window, click the " Settings " tab and click " Change Display
Type ".
3. In the " Change Display Type " window, click " Change " and then click " Have Disk ".
4. Click " browse.. " button and specify A:\(D:\driver) and click " OK ".
5. In the Select Device window, click the appropriate monitor model and then click OK.
6. Continue choosing "
Close " button and " OK " button until you close the " Display
Properties " dialogue box.
Version 4.00.950B
1. Click Start , Settings , Control Panel , and then double-click " Display " icon.
2. In the " Display Properties " window, click the Settings tab and then click " Advanced
Properties " button.
3. In the " Advanced Display Properties " window, click the " Monitor " tab and then click
" Change " button.
4. In the " Select Device " window, click " Have Disk " button.
5. Click " browse.. " button and specify A:\(D:\driver) and click " OK ".
6. In the " Select Device " window, click the appropriate monitor model and then click " OK ".
7. Continue choosing " Close " button and " OK " button until you close the " Display
Properties " dialogue box.
Microsoft
®
Windows
®
NT Operating System
1. Click Start , Settings , Control Panel , and then double-click Display icon.
2. In Display Registration Information window, click Settings Tab and then click All Display
Modes .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click OK .
4. Click Apply button if you see the screen working normally after clicking Test. If the screen
is not normal, change to a different mode (lower mode of resolution, colors or frequency).
Note : If there is no Mode at All Display Modes , select the level of resolution and vertical
frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting
file.