Samsung SyncMaster 2043SW User Manual Download Page 125

Page: 125 / 172

Set the resolution at the Control Panel

→

Display

→

Settings.

Has the video card been set properly?

Set the video card by referring to the video card manual.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) mon-

itor found".

Have you installed the monitor driver?

Install the monitor driver according to the Monitor Driver.

See the video card manual to see if the Plug & Play (VESA DDC) function can be

supported.

Install the monitor driver according to the Monitor Driver.

Check when MagicTune™ does not function properly.

MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug

and Play.

To check whether your PC is available for MagicTune™ feature, follow the steps below

(When Windows is XP);

Control Panel

→

Performance and Maintenance

→

System

→

Hardware

→

Device

Manager

→

Monitors

→

After deleting Plug and Play monitor, find 'Plug and Play mon-

itor' by searching new Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not

support your monitor. When you have a problem with the graphic card, visit our website

to check the compatible graphic card list provided.

http://www.samsung.com/monitor/magictune

MagicTune™ doesn't work properly.

Have you changed your PC or video graphic card?

Download the latest program. The program can be downloaded http://www.sam-

sung.com/monitor/magictune

Did you install the program?

Reboot the computer after installing the program for the first time. If a copy of the pro-

gram is already installed, remove it, reboot the computer, and then install the program

again. You need to reboot the computer for it to operate normally after installing or

removing the program.

Note

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

Check if the power cord and the video cables are properly connected to the computer.

Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

Troubleshooting

124

Downloaded from ManualMonitor.com Manuals

Summary of Contents for SyncMaster 2043SW













































































































































































Search results

Summary of Contents for SyncMaster 2043SW

Reviews:

Related manuals for SyncMaster 2043SW

Brands by name

Popular brands

Samsung SyncMaster 2043SW, User Manual

Search results

Summary of Contents for SyncMaster 2043SW

Reviews:

Related manuals for SyncMaster 2043SW

Brands by name

Popular brands