Samsung SyncMaster 150N, Operator'S Manual

Page: 17 / 58

I
NSTALLATION AND
S
ETUP
2 .2
C
HAPTER
T
WO :
I
NSTALLATION AND
S
ETUP
2
1
Open the cover by lifting
the release lever on the
side of the machine.
2
Insert the paper roll.
0 0 0 00000
0 0 000
00000
000000
000000
0000000
000000000000
3
Install the spacer, if
necessary.
A
B
SPACER
Installing Paper
Your machine must have a roll of paper installed in order to operate. Find the paper roll
included with the parts, and follow the directions below:
Ã
If there is an adhesive sticker
sealing the paper roll, remove it
completely.
The outer diameter of the paper roll
should not exceed 2.05 in/52mm.
(total length of the paper roll is
approximately 98.4ft/30m.)
Ã
If your paper roll is 8.5
in/216mm wide (letter size), the
spacer should be in position ÒAÓ.
For narrow paper (A4 size, 8.27
in/210mm), place the spacer in
position ÒBÓ, pushing its pins into
two small holes on the left-hand
wall of the paper compartment.
4
Pull the paper end past
the edge of the machine
case.
0 0 0 00000
0 0 000
00000
000000
000000
0000000
000000000000
Ã
Be sure the paper exits from the
top of the roll as shown.
4
Connect the AC power
cord.
Ã
Plug one end of the cord into the
back of the machine and the other
end into a standard grounded AC
power outlet.
Ch-2 3/25/98 6:11 PM Page 3