ENG - 6
ENG - 7
Checking the Components
WIRELES
S
Soundbar Sound
+
Subwoofer
Power Cord
Wireless Dongle (WHM520V)
Screw (2 EA)
Holder-Dongle
(Stand Type)
Holder-Dongle
(Wall mount Type / One Mount Type)
• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 11. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specifications
Weight
14.6 kg
Dimensions (W x H x D)
320.0 X 338.3 X 320.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10% ~ 75%
Speaker
Subwoofer x 1, 254.0 mm, 4ohm
Wireless device output power
SRD max transmitter power
25mW at 5.725GHz – 5.825GHz
NOTES
–
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
–
Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached
to the product.
–
Design and specifications are subject to change without prior notice.
Open Source Licence Notice
•
To send inquiries and requests regarding open sources, contact Samsung via Email
([email protected]).
• This product uses some software programs which are distributed under the FreeRTOS Modified GPL.
GPL Software : FreeRTOS
FreeRTOS Modified GPL License
http://www.freertos.org/license.txt
Important Note About Service
•
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the
user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user
manual has not been read).
• You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-W700 to a Soundbar
1. Check the standby status after plugging into an electrical outlet
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer
to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer
blinks. If the LED does not blink, refer to step 7 on page 10.
Bottom of the Wireless Subwoofer
Front of the Wireless Subwoofer
ID SET
POWER
LI
NK
SER
VICE
POWER
ID SET
POWER
LI
NK
SER
VICE
POWER
Blue blinking
• The main unit is heavy. Be careful not to pinch your fingers when pressing the
ID SET
button or
connecting the power cord on the bottom.
•
The upper part of the subwoofer is prone to scratches. Handle it carefully.
Speaker Unit
Rear of the Wireless Subwoofer
•
Do not press on or strike the
Speaker Unit
on the
rear of the body. You can deform or damage the
speaker.
Summary of Contents for SWA-W700
Page 1: ...SWA W700 USER MANUAL ...
