background image

ENG - 3

 

To protect this apparatus from a lightning 
storm, or when it is left unattended and 
unused for long periods of time, unplug it from 
the wall outlet and disconnect the antenna or 
cable system. This will prevent damage to the 
set due to lightning and power line surges.

 

Before connecting the AC power cord to the 
DC adaptor outlet, make sure the voltage 
designation of the DC adaptor corresponds to 
the local electrical supply.

 

Never insert anything metallic into the open 
parts of this apparatus. Doing so may create a 
danger of electric shock.

 

To avoid electric shock, never touch the inside 

of this apparatus. Only a qualified technician 

should open this apparatus.

 

Make sure to plug the power cord in until it is 

firmly seated. When unplugging the power 

cord from a wall outlet, always pull on the 
power cord’s plug. Never unplug by pulling on 
the power cord. Do not touch the power cord 
with wet hands.

 

If this apparatus does not operate normally 
- in particular, if there are any unusual 
sounds or smells coming from it - unplug it 
immediately and contact an authorized dealer 
or service center.

 

Maintenance of Cabinet.

 

– Before connecting other components to 

this product, be sure to turn them off.

 

Be sure to pull the power plug out of the 
outlet if the product is to remain unused or 
if you are leaving the house for an extended 
period of time (especially when children, 
elderly, or disabled people will be left alone in 
the house).

 

– Accumulated dust can cause an electric 

shock, an electric leakage, or a fire by 

causing the power cord to generate sparks 
and heat or the insulation to deteriorate.

 

Contact an authorized service center for 
information if you intend to install your 
product in a location with heavy dust, high or 
low temperatures, high humidity, chemical 
substances, or where it will operate 24 hours 
a day such as in an airport, a train station, etc. 
Failing to do so may cause serious damage to 
your product.

 

Use only a properly grounded plug and wall 
outlet.

 

– An improper ground may cause electric 

shock or equipment damage. (Class l 
Equipment only.)

 

To turn this apparatus off completely, you 
must disconnect it from the wall outlet. 
Consequently, the wall outlet and power plug 
must be readily accessible at all times.

 

Do not allow children to hang on the product.

 

Store the accessories (battery, etc.) in a 
location safely out of the reach of children.

 

Do not install the product in an unstable 

location such as a shaky self, a slanted floor, 

or a location exposed to vibration.

 

Do not drop or strike the product. If the 
product is damaged, disconnect the power 
cord and contact a service center.

 

To clean this apparatus, unplug the power 
cord from the wall outlet, and then wipe 
the product using a soft, dry cloth. Do not 
use any chemicals such as wax, benzene, 
alcohol, thinners, insecticide, air fresheners, 
lubricants, or detergent. These chemicals can 
damage the appearance of the product or 
erase the printing on the product.

 

Do not expose this apparatus to dripping 

or splashing. Do not put objects filled with 

liquids, such as vases, on the apparatus. 

 

Do not plug multiple electric devices into the 
same wall socket. Overloading a socket can 

cause it to overheat, resulting in a fire.

Summary of Contents for SWA-9000S/ZA















Reviews: