7
The vacuum cleaner is provided with a self-resetting thermal cut-out protection which
automatically shut off current on over heating.Overheating can be caused by blockage in the
filter, nozzle, tube or hose.After removing the cause and cooling the motor,vacuum cleaner
automatically start again.
THERMAL CUT-OUT PROTECTION
6
TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
0
- IF YOU HAVE A PROBLEM
Cleaner doesn’t run.
Not firmly plugged in.
Plug unit in firmly.
Poor job of dirt pickup.
Clogged hose or filter,
tube, nozzle.
Remove the object.
Cord doesn't rewind fully
Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2~3m and
push down the cord rewind
button.
Motor runs but doesn't
suck up water.
Check the float in suction.
Discard the water in the
bucket.
Cover dust comes out.
Doesn't break down.
Insert it in the cleaner.
VC-9800WD-00260B-EN 9/2/04 2:37 PM Page 9
