Digital Video Recorder User’s Manual
79
SATA HDD INSTALLATION
1. Insert rubber rings to the bracket and screw the bracket to the HDD.
2. When assemble the SATA converter board, screw on the only upper-right corner
like the picture below.
3. Select "Master" or "Slave" using the Jumper switch on SATA converter board.
Set the Master/Slave using the Jumper switch.
Set the Master/Slave using Jumper switch.
JUMPER Switch
In case of installing two HDDs, firstly set the Master/Slave. If One HDD is "Master", the other
should be set to "Slave".
Need assy Screw
Summary of Contents for SVR-940
Page 1: ...Digital Video Recorder User s Manual 1...
Page 83: ...MEMO...
Page 84: ...MEMO...
Page 85: ...MEMO...