background image

GB

65

GB

64

MP3 Play

When an MP3 Disc is inserted into the DVD-VCR, the first song file
of the first folder plays.

1

Press STOP to stop playback of the first song file, then press
RETURN to display the music folder menu on the right side of the
screen. Up to 8 music folders can be displayed at a time. If you
have more than 8 folders on a disc, press the 

or  

buttons to

bring them up on the screen.

2

Use the 

$

or

buttons to select the desired music folder, the

press ENTER. Use the 

$

or

buttons again to select a song file.

Press ENTER to begin playback of the song file.

DVD

RETURN               

$❷!!!!!!

ENTER

MP3                            Total : 3

music c1

song1

~

~

1 music c1

2 music c2
3 music c3

RETURN               

$❷!!!!!!

ENTER

MP3                      Total : 12

music c1

song1

~

~

1 song 1

2 song 2

3 song 3

4 song 4

5 song 5

6 song 6

7 song 7

8 song 8 

Using the Zoom (DVD/VCD)

1

During play or still mode, press the ZOOM button on the remote. A 
square will be displayed on screen.

2

Use the 

$

,

or 

❿!

button to select the part of the screen you 

want to zoom in on.

3

Press the ENTER button.
- During DVD play : press ENTER to zoom in 2X/4X/2X/Normal in

order.

- During VCD play, press ENTER to zoom in 2X/normal in order.

The simulated surround effect depends on the disc contents. If you

connect the unit to your stereo system, you can enhance sound

quality and produce a greater surround effect. This feature is useful

when you are using the DVD player with a two channel stereo

through the analog outputs.
(Discs which are recorded with LPCM or DTS will not work. When

the DIGITAL OUTPUT or MPEG-2 is set to BITSTREAM in the

SETUP MENU, the 3D Sound function will not work.)

1

During play, press the 3D button. The 3D SOUND mark will be
displayed on screen. (Be sure the DIGITAL OUTPUT is set to PCM.)

2

Press the 

$

or

buttons to turn the 3D Sound feature on or off.

• 3D Sound is possible only on discs recorded using

DOLBY SURROUND or DOLBY DIGITAL. However,
some of these discs do not contain rear channel sound
signals.

• Depending on the disc, the Zoom and 3D Sound

function may not work.

DVD

3D Sound Function

DVD

2

3

1

5

6

4

8

9

7

1

1

Summary of Contents for SV-DVD6E








































Reviews: