GB
33
GB
32
Modifying ShowView Programming
Using the ShowView Feature
Before presetting your DVD-VCR:
◆
Switch on both the television and your DVD-VCR
◆
Check that the date and time are correct
◆
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
To enter a ShowView, press the TIMER button.
Press the
❷!
and ENTER buttons to select
SHOWVIEW
.
Result:
A message is displayed to allow you to enter the
ShowView code.
☛
If all six programmes have been set, the message
TIMER
IS FULL
is displayed. Refer to page 35 if you wish to
cancel a preset recording.
2
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the ShowView code that you are
entering:
◆
Press the
➛
button until the digit to be corrected is
cleared
◆
Enter the correct digit
3
Press the ENTER button.
Result:
The information concerning the programme is displayed.
☛
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
"
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
4
If the programme and times are correct, press the RETURN button.
5
Press the STANDBY/ON button to activate the timer.
6
Refer to page 35 if you wish to:
◆
Check that your DVD-VCR has been programmed correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing are
SHOWVIEW code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the ShowView code for the programme
you wish to record.
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is
manufactured under licence from Gemstar Development Corporation.
SHOWVIEW
CODE ---------
CODE:0-9
CORRECT:
➛
RETURN ENTER
1/JAN TUE
12:09
PR DAY START
→
STOP
V/P
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
"
❷
SET:
❿
RETURN DELETE:CLEAR
TIMER METHOD
STANDARD
SHOWVIEW
RETURN
"
❷
ENTER
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press SETUP a second time to confirm.
If you wish to...
Then...
Select an input source other
◆
Press the
➛
or
❿
buttons, until the
PR
selection flashes.
than the tuner (AV1, AV2 or AUX)
◆
Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
• The AV1, AV2 or AUX source using the INPUT
SEL. button for a satellite tuner or external video
source
➢
The input source must be selected before changing any
other value.
Record a programme every day
◆
Press the
➛
or
❿
buttons, until the
DAY
selection flashes.
(Monday to Sunday) at the same time
◆
Press the
"
or
❷
buttons, until the
DLY
(Daily) value is
displayed.
Record a programme every week
◆
Press the
➛
or
❿
buttons, until the
DAY
selection flashes.
on the same day and at the same time
◆
Press the
"
or
❷
buttons, until the
W-
(Week) value is
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
Extend the recording time
◆
Press the
➛
or
❿
buttons, until the
STOP
selection flashes.
◆
Press the
"
or
❷
buttons to increase or decrease the stop
time.
Select the recording speed
◆
Press the
➛
or
❿
buttons, until the recording speed selection
flashes.
◆
Press the
"
or
❷
buttons until the correct indication is
displayed:
•
AUTO
(Auto Tape Speed Select) : see page 34
•
SP
(Standard Play)
•
LP
(Long Play)
Select the PDC recording
◆
Press the
➛
or
❿
buttons, until the V/P selection flashes.
◆
Press the
"
or
❷
buttons until the “ON” indication is displayed.
☛
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
VCR
VCR
1
2
3
1
5
6
4
5
