Samsung SV-DVD1E Instruction Manual Download Page 43

Page: 43 / 44

Problems and Solutions (VCR)

Before contacting the Samsung after-sales service, perform the following simple checks.

Problem

Explanation/Solution

No power

◆

Check that the power plug is connected to a wall outlet.

◆

Have you pressed the STANDBY/ON button?

You cannot insert a video cassette

◆

A video cassette can only be inserted with the window
side up and the safety tab facing you.

The television programme was not recorded

◆

Check the DVD-VCR aerial connections.

◆

Is the DVD-VCR tuner properly set?

◆

Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful

◆

Was the STANDBY/ON button pressed to activate the timer?

◆

Re-check the recording start/stop time settings.

◆

If there was a power failure or interruption during timer
recording, the recording will have been cancelled.

No playback picture or the picture

◆

Check to see if you are using a prerecorded tape.

is distorted

You cannot see normal broadcasts

◆

Check the TUNER/EXTERNAL setting. It should be on
TUNER.

◆

Check the TV/VCR aerial connections.

Noise bars or streaks on playback

◆

Press the TRK (+or -) buttons to minimize this effect.

When the

II button is pressed

◆

A still picture may have “noise bars”, depending on the

during playback, the still picture

condition of the tape. Press the TRK (+or -) buttonsduring

has severe “noise bars” streaks

SLOW motion to minimize this effect.

Video Head Cleaning

◆

If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.

If when tuning in your TV to the DVD-VCR

1. Remove the aerial input plug from the socket marked (aerial

test pattern your TV does not find the test

symbol) on the rear of the DVD-VCR.

pattern or the pattern when found suffers

2. Carry out the instructions “Tuning Your Television for the DVD-

from interference, it may be due to the

VCR” (see page 13).

DVD-VCR output channel clashing with

3. Carry out the instructions “Setting the DVD-VCR output

the normal TV transmissions in your area.

Channel” (see page 19), move the channel number

To prevent this you will need to change the

several channels down from the original setting.

DVD-VCR output channel in the following

(example:from 60 to 57).

way

4. Replace the aerial plug into the socket marked (aerial symbol)

on the rear of the DVD-VCR.

5. Re-tune your TV to the DVD-VCR again by following

instructions “Tuning Your Television for the DVD-VCR”
(page 13).

6. If the problem still exists repeat steps 1 to 5 moving several

more channels away from the original setting.

If you are unable to solve the problem after reading the above instructions, note:

◆

The model and serial number on the rear of your DVD-VCR

◆

The warranty information

◆

A clear description of the problem

Then contact your nearest SAMSUNG after-sales service.

Technical Specifications

Rated voltage

AC100 - 240V, 50/60Hz

Power consumption

32Watts

Weight

5.6Kg

General

Size

430mm X 357mm X 100mm

Operating ambient temperature

+5°C ~ +35°C

Installation conditions

Operation position : Horizontal,

Relative humidity :Below 75%

Input

Video input (Rear)

RCA jack : 1.0Vp-p (unbalanced) 75

Ω

Audio input (Rear)

RCA jack :-8dBm, 47Kohm unbalanced

RF out

UHF 21-69 (Initial CH36)

UHF 28-69 (Initial CH38) : Australia model

Audio (DVD, VCR)

Headphones, RCA jack

Output

Audio (DVD only)

Digital audio out (OPTICAL, COAXIAL)

Video (DVD, VCR)

RCA jack

Video (DVD only)

S-Video out

COMPONENT out : RCA jack

Tape format

VHS type video tape,

S-VHS type video tape (Playback only)

Color system

PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV

Tuning system

B/G, D/K (OPTION)

VCR

Video S/N

Above 43dB (standard recording)

Resolution

Above 240 lines (standard recording)

Audio S/N

Above 68dB (Hi-Fi), 39dB (Mono)

Audio frequency characteristics

20Hz - 20KHz (Hi-Fi)

Disc

DVD, CD (12cm), CD(8cm), VIDEO-CD (12cm)

DVD

Audio S/N

115dB

Audio dynamic range

105dB

01479A DVD-V5000/XSA-GB5 9/5/56 8:09 AM Page 62

Summary of Contents for SV-DVD1E













































Search results

Summary of Contents for SV-DVD1E

Reviews:

Related manuals for SV-DVD1E

Brands by name

Popular brands

Samsung SV-DVD1E, Instruction Manual

Search results

Summary of Contents for SV-DVD1E

Reviews:

Related manuals for SV-DVD1E

Brands by name

Popular brands