6
If the programme and times are correct, press the
MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
Result: The Timer indicator ( ) is displayed.
☛
If no cassette has been inserted when you
press VCR STANDBY/ON (STANDBY/ON) the
Timer indicator flashes. If the safety tab on the
cassette has been broken, the cassette is
ejected. Insert the appropriate cassette.
8
Refer to page 21 if you wish to:
◆
Check that your VCR has been programmed
correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing
are G-CODE code numbers, which allow you to
programme your videorecorder instantly with the
remote control. Tap in the G-CODE code for the
programme you wish to record.
™G-CODE is a trademark of Gemstar Development Corporation. The G-
CODE system is manufactured under licence from Gemstar
Development Corporation.
ENG-18
Before presetting your VCR:
◆
Switch on both the television and your VCR
◆
Check that the date and time are correct
◆
Insert the cassette on which the programme is
to be recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result: The TIMER METHOD is displayed.
2
Press the corresponding
or
❷
buttons, until the
G-CODE option is selected.
3
Press the
❿
button to select G-CODE.
Result: A message is displayed to allow you to
enter the G-CODE code.
☛
If all six programmes have been set, the
message TIMER IS FULL is displayed. Refer to
page 21 if you wish to cancel a preset recording.
4
Press the numeric buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
➢
If you wish to correct the G-CODE code that
you are entering:
◆
Press the
➛
button until the digit to be
corrected is cleared
◆
Enter the correct digit
5
Press the MENU button.
Result: The information concerning the programme
is displayed.
☛
When using the VI function for the first
time with stored stations, the programme number
flashes. This one time, you must enter the station
number manually by pressing the
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
Using the G-CODE Feature
★
(SV-675/SV-275 Only)
** TIMER METHOD **
STANDARD
G-CODE
❷
❿
END:
MENU
G-CODE
CODE ---------
CODE:
0-9
CORRECT:
➛
END:
MENU
PROG
❷
➛❿
DELETE:
CLR/RST
MENU
1/JAN THU 21:28
PR DAY START
→
STOP
1 TH 1 12:00
→
12:50SP
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
V
IPC
+
NICAM
02124A SV-675/XSA-eng 3/8/04 6:54 PM Page 18
