COLOR DOME CAMERA
User Guide
32
COLOR DOME CAMERA
User Guide
33
Operating Your Camera
MOTION DET
:
This product has a feature that allows you to observe
movement of objects in 8 different areas on the
screen, and the words 'MOTION DETECTED' appear
on the screen when movement is detected.
You can monitor activity more efficient.
…
1) When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates
‘
MOTION DET
’
.
…
2)
…
Set up the mode using the Function Setup switch.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS
: Determines which of the 4 vertices of each MD area is to be used.
- XPOS
: Determines the coordinate of the horizontal axis for SEL POS.
- YPOS
: Determines the coordinate of the vertical axis for SEL POS.
- FILL
→
SET : Fills in a selected MD area. The color of filling is sequentially selected
as brown, orange, blue, cyan, green, yellow, magenta and red.
- RETURN
: Select this to save the MOTION DET menu settings and return to the
SPECIAL menu.
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA
AREA1
2. MODE
OFF
3. MASK COLOR
GREEN
4. MASK TONE
1
5. TOP
39
6. BOTTOM
79
7. LEFT
13
8. RIGHT
52
9. RETURN
- CAM ID : Determines the camera's identification
number (between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/
38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for
the parity bits.
- RET PKT : Determines whether to send a command
back to the controller device when a
communication control command is sent to the camera.
- DISP ID : Display camera title on top left corner of the screen.
- PROTOCOL : Select the communication PROTOCOL.
(SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and
PANASONIC)
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
1)
…
When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates ‘PRIVACY’.
… …
2)
…
Set up the mode using the Function Setup switch.
- AREA
: You can select up to 12 PRIVACY areas.
- MODE
: Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN
: Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
* Initial value of communication adjustment
Item
Camera ID
BAUD RATE UART MODE
PET PKT
Initial value
1
9600
8-NONE-1
ENABLE
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the camera
through an external control device.
…
1)
…
When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates ‘COMM ADJ’.
… …
2)
…
Set up the mode using the Function Setup switch.
