COLOR CCD CAMERA
User Guide
34
COLOR CCD CAMERA
User Guide
35
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
●
Nothing appears on the screen.
▶
Check that the power cord and line connection between the camera and monitor are properly
connected.
▶
Check that you have properly connected UTP cable or BNC cable to the camera.
▶
Check the type of lens.
▶
Check the pin arrangement for the UTP cable.(TIA/EIA-568B)
●
The image on the screen is dim.
▶
Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶
Set the monitor to the proper condition.
▶
If the camera is exposed to very strong light, change the camera position.
●
The image on the screen is dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75
Ω
/ Hi-z properly.
●
The camera is not working properly, and the surface of the camera is hot.
▶
Check that you have properly connected the camera to an appropriate power source.
●
The SENS-UP function does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
●
The Motion Detection function does not work.
▶
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
●
Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu .
●
The screen flickers continually.
▶
Ensure the camera is not pointing towards the sun.
●
When coaxial communication is not available:
▶
Make sure that the camera and monitor are installed within the recommended distance.
▶
Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.
●
Picture is distorted.
▶
Check the length of the UTP cable (900m(3000ft) or less).
●
The camera does not work, and the video feed from the camera is not being received.
▶
Check the Power Supply to see whether the connection status and pin arrangement for the
camera's UTP cable and the Camera Input UTP cable are normal.
※
The specification for this product may change without prior notice for product improvement.
※
This specification is based on a transmission distance of 500 meters; in cases of long-distance
transmissions, some degradation in picture quality may occur depending on the operating environment.
SUB-2000N
SUB-2000P
ELECTRICAL
Input Voltage
AC 24V ±10% / AC 28V ±10% / DC12V±10%
Power Consumption
Max 3.5W
VIDEO
Imaging Device
1/3 inch, Diagonal 6mm Super HAD CCD
Total / Effective Pixels
811(H) x 508(V) / 768(H) x 494(V)
795(H) x 596(V) / 752(H) x 582(V)
Scanning System
2:1 Interlace
Synchronization
Internal / Line-Lock
Frequency
H : 15.734KHz / V : 59.94Hz
H: 15.625KHz / V: 50.00Hz
Horizontal Resolution
600TVL
Min. Illumination
0.05 Lux (50IRE, @F1.2), 0.0001Lux (SENS-UP, x512)
S/N (Y Signal)
52dB (Weight On, AGC OFF)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
UTP Output
Built-in UTP TX (Maximum transmission length 900m(3000ft)) : Balanced differential signal 100Ω
OPERATIONAL
Electronic Shutter Speed
1/60sec~1/120ksec
1/50sec ~ 1/120ksec
Shutter Mode
ESC, MANUAL, A.FLK, FIXED
On Screen Display
NTSC : English, Korean, Japanese, Spanish, French, Portuguese, Taiwanese
PAL : English, Chinese, German, Italian, French, Spanish, Russian, Czech, Polish,
Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
SSDR
ON / OFF (Level adjustable)
Backlight Compensation
BLC / HLC / OFF
Day & Night
COLOR / B/W / AUTO
Gain Control
LOW / HIGH / OFF
White Balance
ATW / OUTDOOR / INDOOR / MANUAL / AWC (1,700°K ~ 11,000°K)
SENS-UP
Auto / OFF (Selectable x2 ~ x512)
Motion Detection
ON / OFF (8 Programmable zones)
Privacy Masking
ON / OFF (12 Programmable zones)
SSNRIII
ON / OFF (Level adjustable)
Digital Zoom
ON / OFF (x1 ~ x16)
DIS
ON / OFF
Camera Title
ON / OFF (Display 15 Characters)
Sharpness
ON / OFF (Level adjustable)
Flip / Mirror
ON / OFF
Coaxial Communication
Pelco Coaxitron
RS-485 Communication
SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC
ENVIRONMENTAL
Operating Temperature / Humidity
-10°C ~ +50°C / 30% ~ 80% RH
MECHANICAL
Lens Mount
C / CS Mount
Back Focus Adjustment
Manual
Dimension / Weight
58(W) x 52(H) x 121(D) / 290g
Specifications
