English
_ 11
INITIALIZATION
initialization
OUTPUT FORMAT
You can adjust the output format of the numeric values from the keypad.
You can select 4/8 bit Burst or 26bit Wiegand.
Adjust the format according to the controller receiving the keypad input.
To change the output format, use the switch on the rear of the
product.
See the table below to make adjustment as needed.
Output Format
SW #1
SW #2
Output Format of Card
Output Format of Keypad
ON
ON
26bit W RS-232
8bit Burst (Default)
ON
OFF
26bit W RS-232
26bit W RS-232
OFF
ON
26bit W RS-232
26bit W RS-232
OFF
OFF
26bit W RS-232
4bit Burst
Switch #1 and #2 of SW are set to ON by default.
Before you change the output format, you must disconnected the power.
1.
2.
❖
M
ON
1
2
