background image

AB82-02555A

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of 
with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate 
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are 
not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and 
recycle them through your local, free battery return system.

Correct Disposal of This Product  (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. 
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To 
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these 
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for 
details of where and how they can take these items for environmentally safe recycling.  

Business users should contact their supplier and check the terms and conditions of the purchase contract. 
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Summary of Contents for SSA-R2000



















Reviews: