Digital Video Recorder User’s Manual
48
Digital Video Recorder User’s Manual
49
EVENT BEEP : Select whether to turn the buzzer ON or OFF.
EVENT AUTO SEQ : Set to display in full screen the channel that the event activated.
EVENT TIME : Set the full screen display time when the event was activated. (3 to 5 seconds)
During this EVENT TIME, other event-activated channels record but do not display in full
screen. Only after this EVENT TIME ends, can other event-activated channels be displayed
in full screen.
TEXT MONITORING : Set whether to display POS information such as product name, price, quantity, etc.
SENSOR : Select the channel for sensor setup.
- SENSOR TYPE : Select the sensor type. (N/O, N/C)
- N/O : NORMAL OPEN type sensor
- N/C : NORMAL CLOSE type sensor
- OFF : Set the sensor OFF
A Schedule can be set 24 hours a day.
· S : Sensor record
· - : No record
· C : Normal record
· M : Motion detection record
· T : Text record
IMAGE QUALITY [High/Mid/Low] : Set the compression level for images to be stored. At a resolution of
720X480, the system records at max. 30fps. At a resolution of 360X240, the system records at max. 12fps.
PRE EVENT DURATION : This is the pre-event recording setup. It automatically records 5 seconds of
pre-event data if you set it to 5 secs. Pre-event recording is not activated if you
set it to OFF.
POST EVENT DURATION : Recording continues for the predefined time following the occurrence of an
event. The available setting values are from 1 to 20 seconds.
AUDIO : Select whether to save audio data along with video.
SENSOR SELECT: Set it to ON to activate the sensor.
5.6.1 EVENT
5.6 EVENT SETUP
This is a set up menu related to the DVR system. Press the MENU button and select the Tab using
the Left/Right button. The submenu related to the system then appears as illustrated below. Press the
ENTER button and select the submenu using the Left/Right button. Then press the ENTER button again
and you can select setup items using the Left/Right button.
After setting RECORD MODE/MOTION, set the motion detection for every
CHANNEL : Select the channel for motion detection setup.
MOTION ZONE : Select the area for motion detection to Full or Partial zone.
- FULL ZONE : Detects motion by analyzing the changes in Full images from cameras.
- PARTIAL ZONE : Users can select the desired zone for motion detection.
MOTION SENSITIVITY : You can set the sensitivity to changes on a screen from 1 to 9. Higher values mean
more precise motion detection.
5.6.2 MOTION DETECTION
This menu is to setup recording of POS data over video. In order to match it with an input device and
its protocol, assign a HEADER1/2 and DELIMITER and set the line to display the data.
5.6.3 TEXT
Chapter 5. Configuration
Chapter 5. Configuration
Summary of Contents for SRV-450
Page 1: ...Digital Video Recorder User s Manual 1 ...
Page 41: ...MEMO MEMO ...
