safety information _7
It is hazardous for anyone other than an Authorised Service Person to service this
appliance. In Queensland - the authorized Service Person MUST hold a Gas Work
Authorisation or Licence for hydrocarbon refrigerants, to carry out Servicing or
repairs which involve the removal of covers. (For Australia only)
ADDITIONAL TIPS FOR PROPER USAGE
•
Allow the appliance to stand for 2hours after installation.
•
To get best performance of product,
- Do not place foods too closely in front of the vents at the rear of the appliance as it
can obstruct free air circulation in the freezer compartment.
- Wrap the food up properly or place it in airtight containers before put it into the fridge
freezer
- Do not put any newly introduced food for freezing near to already frozen food.
•
Please observe maximum storage times and expiry dates of frozen goods.
•
There is no need to disconnect the refrigerator from the power supply if you will be away
for less than three weeks. But, remove all the food if you are going away for the three
weeks or more. Unplug the refrigerator and clean it, rinse and dry.
•
Most power failures that are corrected in an hour or two will not affect your refrigerator
temperatures. However, you should minimize the number of door openings while the
power is off. But should the power failure last more than 24hours, remove all frozen
food.
•
Do not store food which goes bad easily at low temperature, such as bananas, melons.
•
Place the ice tray at the originally provided posistion by manufacturer in order to achieve
optimal ice-freezing.
•
Your refrigerator is frost-free, so you are no need to defrost manually and the refrigerator
will do so automatically.
•
Temperature rising during the defrost can comply with relevant national requirement.
But If you want to prevent an undue rise in the temperature of the frozen food while
defrosting the appliance, please wrap the frozen food in several layers of paper such as
newspaper.
•
Any increase in temperature of frozen food during defrosting can shorten its storage life
.
SAVING ENERGY TIPS
- Install the appliance in a cool, dry room with adequate ventilation.
Ensure that it is not exposed to direct sunlight and never put it near a direct source of
heat (radiator, for example).
- Never block any vents or grilles on the appliance.
- Allow warm food to cool down before placing it in the appliance.
- Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the
frozen products to cool food in the refrigerator.
- Do not keep the door of the appliance open for too long when putting food in or taking
food out. The shorter time for which the door is open, the less ice will form in the freezer.
Clean the rear of the refrigerator regularly. Dust increases energy consumption.
- Do not set temperature colder than necessary.
- Ensure sufficient air exhaust at the refrigerator base and at the back wall of the refrigerator.
- Do not cover air vent openings.
- Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
This appliance is intended to be used in household and similar applications such as
- Staff kitchen areas in shops,offices and other working environments;
- Farm houses and by clients in hotels,motels and other residential type environments;
- Bed and breakfast type environments;
- Catering and similar non-retail applications.
safety information
CAUTION
