4_ safety information
•
In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the appliance may be sited depends on the
amount of refrigerant used.
• The room must be 1m
3
in size for every 8g of R600a refrigerant inside the appliance.
•
Never start up an appliance showing any signs of damage. If in doubt, consult your
dealer.
• Please dispose of the packaging material for this product in an environmentally friendly
manner
• Do not change the pars in the refrigerator at random.
SEVERE WARNING SIGNS
• Do not install the refrigerator in a damp place or place where it may come in contact
with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
•
Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room
heaters or other appliance.
• Do not place a lighted candle or open flames on the refrigerator.
- This may result in electric shock or fire.
•
Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
•
Use 220~240V power.
Do not plug several appliances into the same multiple power
board. The refrigerator should always be plugged into its own individual electrical which
has a voltage rating that matched the rating plate.The refrigerator must be grounded.
- This provides the best performance and also prevents overloading house wiring
circuits,which could cause a fire hazard from overheated wires.
•
Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and
pull straight out from the outlet.
- Damage to the cord may cause a short-circuit, fire and/or electric shock.
•
Make sure that the power plug is not squashed or damaged by the back of the
refrigerator.
•
Do not bend the power cord excessively or place heavy articles on it.
- This constitutes a fire hazard.
•
Do not use a loose socket or a cord that shows cracks or abrasion damage along its length
or at either end.
•
If the power cord is damaged, have it replaced immediately by the manufacturer or its
service agent.
•
When moving the refrigerator, be careful not to roll over or damage the power cord.
•
Do not insert the power plug with wet hands.
•
Disconnect the power before cleaning or maintaining your refrigerator.
- Do not use a wet or damp cloth when cleaning the pulug.
•
Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of fire.
•
If the refrigerator is disconnected from the power supply, you should wait for at least ten
minutes before plugging it back.
•
If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock or fire.
•
Th
e
appliance must be positioned so that the plug is accessible after installation.
•
Do use separate and reliable earthing power. Don’t share a socket with other
appliances. In order to ensure safety, the socket and its connecting wire must be able to
bear over 10A current.
WARNING
WARNING
safety information
