Samsung SRP-250 Series, Operator'S Manual

Page: 36 / 50

35
ESC t n
[Name] Select character code table.
[Format] ASCII ESC t n
Hex 1B 74 n
Decimal 27 116 n
[Range] 0
≤
n
≤
5, 254
≤
n
≤
255
[Description] Selects a page n from the character code table.
n Page
0 0 (PC437 {USA, standard Europe})
2 2 (PC850 {Multilingual})
3 3 (PC860 {Portuguese})
4 4 (PC863 {Canadian-French})
5 5 (PC865 {Nordic})
19 19(PC858{Euro})
ESC u n
[Name] Peripheral status.
[Format] ASCII ESC u n
Hex 1B 75 n
Decimal 27 117 n
[Range] n = 0
[Description] Transmits the peripheral status (drawer).
After receiving this command, the printer transmits only
1 byte without confirming the condition of the DSR signal.
Transmit data : 01H = drawer open.
00H = drawer closed.
•
This command is available only with a serial interface, and is ignored
with a parallel interface.
ESC { n
[Name] Turns on/off upside-down printing mode.
[Format] ASCII ESC { n
Hex 1B 7B n
Decimal 27 123 n
[Range] 0
≤
n
≤
255
[Description] Turns upside-down printing mode on or off.
•
When the LSB of n is 0, upside-down printing mode is turned off.
•
When the LSB of n is 1, upside-down printing mode is turned on.