Samsung SRN-473S User Manual Download Page 122

Page: 122 / 192

122_

live viewer

Setting the layout

If you don't add or save it in the layout after registering a camera,

the live screen will not be displayed.
Click on the <

> button to launch the layout setting screen.

if you want to add a layout

Click on <

Set the layout name to add and click on the <

> button to

add it.

if you want to change the layout name

Select the layout name to change and click on <

After changing the name, click on the outside of the layout

window to change the name.

if you want to save the layout

Click on <

The changed layout will be saved.

The layout for each user is saved separately.

CAM 01 - TEXT 01

CAM 05 - TEXT 01

CAM 09 - TEXT 01

CAM 13 - TEXT 01

CAM 02 - TEXT 01

CAM 06 - TEXT 01

CAM 10 - TEXT 01

CAM 14 - TEXT 01

CAM 03 - TEXT 01

CAM 07 - TEXT 01

CAM 11 - TEXT 01

CAM 15 - TEXT 01

CAM 04 - TEXT 01

CAM 08 - TEXT 01

CAM 12 - TEXT 01

CAM 16 - TEXT 01

Summary of Contents for SRN-473S

































































































































































































Search results

Summary of Contents for SRN-473S

Reviews:

Samsung SRN-473S, User Manual, Page: 122 / 192

Search results

Summary of Contents for SRN-473S

Reviews: