Samsung SRD-1653D Page 14 User Manual Download

Page: 14 / 138

14_

overview

REMOTE CONTROL

Displays the search menu.

POWER

Displays the Exit pop up screen.

NUMBER [0~+10]

Used as the numeric input keys, or displays a single

channel.

T/W

Zooms in or out.

BACKUP

Displays the Backup Menu.

MODE

Changes the screen mode.

Goes to the system menu screen.

Up/Down/Left/Right(

▲▼◄ ►

)/ENTER

Moves the cursor up/down/left/right, and runs the Select

Menu.

FREEZE

Freezes the screen temporarily.

ZOOM

Runs the digital zoom (x2) function.

VIEW

Runs the View function in the PTZ mode.

OPEN/CLOSE

Opens or closes the CD tray.

DVR

Activates the DVR function.

Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.

PTZ

Displays or ends PTZ.

SCROLL

Moves the menu scroll.

RETURN

Returns to the previous screen.

AUDIO

Turns Audio on/off.

ALARM

Cancels the Alarm.

REC LOCK

Selects the recording lock function.

PRESET

Displays the Preset Setup.

REC

Starts or ends the live recording.

Skip Backward (by unit time),

Slow Rewind, Slow Forward,

Skip Forward (by unit time)

Move Frame

While paused, moves to the previous/next frame.

FR, STOP, PLAY/PAUSE, FF

Summary of Contents for SRD-1653D











































































































































Search results

Summary of Contents for SRD-1653D

Reviews:

Related manuals for SRD-1653D

Brands by name

Popular brands

Samsung SRD-1653D, User Manual

Search results

Summary of Contents for SRD-1653D

Reviews:

Related manuals for SRD-1653D

Brands by name

Popular brands