background image

If distribution of executable or object code is made by offering access to 
copy from a designated place, then offering equivalent access to copy 
the source code from the same place counts as distribution of the 
source code, even though third parties are not compelled to copy the 
source along with the object code.

4. 

You may not copy, modify, sublicense, or distribute the Program 

except as expressly provided under this License. Any attempt otherwise 
to copy, modify, sublicense or distribute the Program is void, and will 
automatically terminate your rights under this License. However, parties 
who have received copies, or rights, from you under this License will not 
have their licenses terminated so long as such parties remain in full 
compliance.

5. 

You are not required to accept this License, since you have not 

signed it. However, nothing else grants you permission to modify or 
distribute the Program or its derivative works. These actions are 
prohibited by law if you do not accept this License. Therefore, by 
modifying or distributing the Program (or any work based on the 
Program), you indicate your acceptance of this License to do so, and all 
its terms and conditions for copying, distributing or modifying the 
Program or works based on it.

6. 

Each time you redistribute the Program (or any work based on the 

Program), the recipient automatically receives a license from the original 
licensor to copy, distribute or modify the Program subject to these 
terms and conditions. You may not impose any further restrictions on 
the recipients’ exercise of the rights granted herein. You are not 
responsible for enforcing compliance by third parties to this License.

7. 

If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to patent issues), 
conditions are imposed on you (whether by court order, agreement or 
otherwise) that contradict the conditions of this License, they do not 
excuse you from the conditions of this License. If you cannot distribute 
so as to satisfy simultaneously your obligations under this License and 
any other pertinent obligations, then as a consequence you may not 
distribute the Program at all. For example, if a patent license would not 
permit royalty-free redistribution of the Program by all those who receive 
copies directly or indirectly through you, then the only way you could 
satisfy both it and this License would be to refrain entirely from 
distribution of the Program. 

If any portion of this section is held invalid or unenforceable under any 
particular circumstance, the balance of the section is intended to apply 
and the section as a whole is intended to apply in other circumstances. 

It is not the purpose of this section to induce you to infringe any patents 
or other property right claims or to contest validity of any such claims; 
this section has the sole purpose of protecting the integrity of the free 
software distribution system, which is implemented by public license 
practices. Many people have made generous contributions to the wide 
range of software distributed through that system in reliance on 
consistent application of that system; it is up to the author/donor to 
decide if he or she is willing to distribute software through any other 
system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be 
a consequence of the rest of this License.

8. 

If the distribution and/or use of the Program is restricted in certain 

countries either by patents or by copyrighted interfaces, the original 
copyright holder who places the Program under this License may add 
an explicit geographical distribution limitation excluding those countries, 
so that distribution is permitted only in or among countries not thus 
excluded. In such case, this License incorporates the limitation as if 
written in the body of this License.

9. 

The Free Software Foundation may publish revised and/or new 

versions of the General Public License from time to time. Such new 
versions will be similar in spirit to the present version, but may differ in 
detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program 
specifies a version number of this License which applies to it and “any 
later version”, you have the option of following the terms and conditions 
either of that version or of any later version published by the Free 
Software Foundation. If the Program does not specify a version number 
of this License, you may choose any version ever published by the Free 
Software Foundation.

10. 

If you wish to incorporate parts of the Program into other free 

programs whose distribution conditions are different, write to the author 
to ask for permission. For software which is copyrighted by the Free 
Software Foundation, write to the Free Software Foundation; we 
sometimes make exceptions for this. Our decision will be guided by the 
two goals of preserving the free status of all derivatives of our free 
software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11. 

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, 

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT 
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE 
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER 
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY 
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT 
NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF 
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE 
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY 
SERVICING, REPAIR OR CORRECTION.

12. 

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR 

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY 
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR 
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED 
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR 
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF 
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN 
IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest 
possible use to the public, the best way to achieve this is to make it free 
software which everyone can redistribute and change under these 
terms.

To do so, attach the following notices to the program. It is safest to 
attach them to the start of each source file to most effectively convey 
the exclusion of warranty; and each file should have at least the 
“copyright” line and a pointer to where the full notice is found.

one line to give the program’s name and an idea of what it does.

Copyright (C) yyyy name of author

This program is free software; you can redistribute it and/or modify it 
under the terms of the GNU General Public License as published by the 
Free Software Foundation; either version 2 of the License, or (at your 
option) any later version.

This program is distributed in the hope that it will be useful, but 
WITHOUT ANY WARRANTY; without even the implied warranty of 
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 
the GNU General Public License for more details.

You should have received a copy of the GNU General Public License 
along with this program; if not, write to the Free Software Foundation, 
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Also add information on how to contact you by electronic and paper 
mail. If the program is interactive, make it output a short notice like this 
when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author 
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details 
type ‘show w’. This is free software, and you are welcome to 
redistribute it under certain conditions; type ‘show c’ for details.

The hypothetical commands ‘show w’ and ‘show c’ should show the 
appropriate parts of the General Public License. Of course, the 
commands you use may be called something other than ‘show w’ and 
‘show c’; they could even be mouse-clicks or menu items--whatever 
suits your program.

You should also get your employer (if you work as a programmer) or 
your school, if any, to sign a “copyright disclaimer” for the program, if 
necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program 
‘Gnomovision’ (which makes passes at compilers) written by James 
Hacker.

signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This 
General Public License does not permit incorporating your program into 
proprietary programs. If your program is a subroutine library, you may 
consider it more useful to permit linking proprietary applications with the 
library. If this is what you want to do, use the GNU Lesser General 
Public License instead of this License.

GNU GENERAL PUBLIC LICENSE

Version 3, 29 June 2007

Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/>

Everyone is permitted to copy and distribute verbatim copies of this license 
document, but changing it is not allowed.

Summary of Contents for SRD-1653D











































































































































Reviews: