Samsung SRD-1610 User Manual Download Page 5

Page: 5 / 132

English

overview

standards approvals

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

package contents

Please unwrap the product, and place the product on a flat place or in the place to be installed.

Please check the following contents are included in addition to the main unit.

Remote Control

Mouse

Power Cable

Network Viewer Software /

User Manual CD

User Manual

Remote Control Battery (AAA)

SATA Cable

(SRD-830D/850D/870D/1610D/

1630D/1650D/1670D : 4EA)

(SRD-830/850/870/1610/1630/

1650/1670 : 5EA)

Audio Extension Cable (optional)

(SRD-850/850D/870/870D/

1650/1650D/1670/1670D)

HDD Fixing Screw

(SRD-830D/850D/870D/1610D/1630D/

1650D/1670D : 16EA)

(SRD-830/850/870/1610/1630/1650/

1670 : 20EA)

Bracket Fixing Screw(4EA)

Bracket Rack

For models that are not equipped with the HDD, one SATA cable is provided for HDD installation.

Summary of Contents for SRD-1610





































































































































Search results

Summary of Contents for SRD-1610

Reviews:

Related manuals for SRD-1610

Brands by name

Popular brands

Samsung SRD-1610, User Manual

Search results

Summary of Contents for SRD-1610

Reviews:

Related manuals for SRD-1610

Brands by name

Popular brands