Samsung SRD-1610 User Manual Download Page 111

Page: 111 / 132

English

_111

ppen

DIX

Symptom

Countermeasures

I've found that the DVR does not recognize as many

disks as installed when I have connected multiple

external HDDs to the DVR.

It takes time for the DVR to recognize multiple external HDDs. Try again

in a moment and if the problem (of failure to recognize as many HDDs

as connected) persists, it may occur due to a mechanical error of the

HDD installed. Try again with a different HDD.



A message of “Need to reset date/time.” Is displayed

on the screen.

This message is displayed if there occurs a problem with the time

setting of the internal clock or an error in the clock itself.

Contact the retailer or the service center for more information.



The time bar is not displayed in Search mode.

The timeline can switch between normal and extension mode.

In extension mode, the time bar may not be displayed in the current

timeline. Switch to normal mode or use the left or right button to

navigate through the time bar.



The “NO HDD” icon and an error message are

displayed.

Check the HDD for connection. If the problem persists in a normal

condition, contact the nearest service center to have the HDD checked

by the service personnel.



I have installed an additional HDD on the DVR but it

does not recognize the HDD.

See the compatibilty list to check if the additional HDD is supported by

the DVR. For the compatibility list, contact the retailer where you

purchased the DVR.



I have connected an external storage device (external

SATA HDD) to the DVR but the DVR seems not to

recognize it.

See the compatibility list of external storage devices to check if the

connected device is supported by the DVR.

For the compatibility list, contact the retailer where you purchased the

DVR.



If I press the ESC key in full screen mode of the

WebViewer, the system does not switch to a normal

split mode.

Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC

key again. The system will switch to a normal split mode.



I found it difficult to configure the network settings if

using the default search, backup and router settings.

For more information, refer to the user manual.

If you want to check the basics of the product for a quick start, refer to

the quick start guide (backup, search).

If you use the router for network connection, refer to the “

Connecting

to the Internet using the router

” section in this manual.






I forgot the password.

Contact the DVR administrator for help.



Backup data is just not played by the PC or DVR.

When you are backing up data, you have choices about the player

either: PC or DVR. Make your selection before proceeding.

If you are using the PC to play the data, the format of the backup file

should be either AVI or SEC.

If you are using the DVR for this purpose, formatting backup files should

be done by the DVR.



My player does not switch to Live mode while in

playback.

Press the Stop [

] button on the DVR or the remote control, or click the

[

] icon on the launcher to switch to Live mode.



Summary of Contents for SRD-1610





































































































































Search results

Summary of Contents for SRD-1610

Reviews:

Related manuals for SRD-1610

Brands by name

Popular brands

Samsung SRD-1610, User Manual

Search results

Summary of Contents for SRD-1610

Reviews:

Related manuals for SRD-1610

Brands by name

Popular brands