Samsung SR8980, (Polish) Instrukcja Obs?Ugi

Page: 245 / 272

operating _29
03 OPERA
TING
Recharging
You can have the vacuum cleaning robot return to the charger
to charge the battery by using the Recharging button.
When the vacuum cleaning robot is operating, press the (
■
)
button to cancel the operation and press the Recharging button.
Press the Recharging button. 1.
(“ - ”) is displayed on the display panel and the vacuum
cleaning robot returns to the charging station for recharging.
To stop the vacuum cleaning robot while it is returning to the charger,
2.
press the ( ) button.
To test the auto charge function, press the Recharging button when 3.
the vacuum cleaning robot is less than 1.5m from the charger.
Troubleshooting when the vacuum cleaning robot does not
return to the charger
Check the installation of the charger -
When the charger is in a location where the charger cannot guide -
the vacuum cleaning robot to the charger.
When the charger is more than 5m away from vacuum cleaning
-
robot.
: It may require a longer time for the vacuum cleaning robot to
return to the charger.
Manually charge the vacuum cleaning robot in the following cases.
■
When the charger is installed in a corner. -
When the battery is fully discharged. -
When the vacuum cleaning robot is trapped by an obstacle -
(furniture etc.)
When the vacuum cleaning robot cannot pass over the doorsill to
-
the location where the charger is installed.
1.5
m
ah
ea
d
1.5m ahead
Using the main unit Using the main unit
buttons buttons
Using the remote Using the remote
control control
DJ68-00632C.indb 29 DJ68-00632C.indb 29 2012.1.25 10:55:55 AM 2012.1.25 10:55:55 AM