troubleshooting
_45
05 TROUBLESHOOTING
TROUBLESHOOTING FOR ERROR CODES
ERROR CODE
CAUSE
SOLUTION
Vacuum cleaning robot is
•
caught, stuck or trapped
while navigating.
Turn off the Power Switch at the bottom and
•
move the vacuum cleaning robot to a different
location.
A foreign substance (string,
•
paper, toy etc.) is caught in
the power brush.
Turn off the Power Switch at the bottom and
•
remove the foreign substance from the power
brush.
A foreign substance (string,
•
paper, toy etc.) is caught in
the left driving wheel.
Turn off the Power Switch at the bottom and
•
remove the foreign substance from the left
driving wheel.
A foreign substance (string,
•
paper, toy etc.) is caught in
the right driving wheel.
Turn off the Power Switch at the bottom and
•
remove the foreign substance from the right
driving wheel.
Check the Bumper sensor.
•
Turn off the at the bottom, and then remove
•
the obstacle from the front of the vacuum
cleaning robot or move it to a different location.
A foreign substance (dust,
•
stain etc.) is on the Obstacle
sensor window.
Turn off the Power Switch at the bottom and
•
wipe the foreign substance from the front and
rear sensor windows using a soft cloth.
A foreign substance (Dust,
•
stain etc.) is on the Cliff sensor
window.
Turn off the Power Switch at the bottom and
•
wipe the foreign substance on the cilff sensor
window with a soft cloth.
Dust bin not inserted.
•
Insert the dust bin until you hear a “Click”
•
sound.
A foreign substance (String,
•
cloth etc.) is caught on the
edge-cleaning side rotating
brush.
Turn off the Power Switch at the bottom and
•
wipe the foreign substance from the edge-
cleaning side rotating brush.
If you press the Start/Stop button or turn off the Power Switch, the error code is cleared.
❈
DJ68-00633C.indb 45
DJ68-00633C.indb 45
2011.11.15 8:43:37 AM
2011.11.15 8:43:37 AM
