background image

Operating the cleaner

 _25

Operating the cleaner

03  
OPERA

TING

 THE
 CLEANER

USING THE ROBOTIC VACUUM CLEANER

AUTO CLEANING

The robotic vacuum cleaner will move by itself and 

automatically clean the house until cleaning is completed 

once.

  If cleaning begins when the robotic vacuum cleaner is docked with 

the charger station, the time to return to the charger is decreased 

since the robotic vacuum cleaner remembers its original position 

while moving.

  If the battery level becomes too low while cleaning, the robotic 

vacuum cleaner will automatically return to the charger station and 

resume cleaning after charging its battery. (Number of cleaning 

operations resumed: Once)

While cleaning

When cleaning is

complete

About the Resume Cleaning function

  

If the robotic vacuum cleaner has evaluated 

that cleaning is complete, the resume cleaning 

function is not performed.

  

If you move the robotic vacuum cleaner when it 

is being charged or press a button, the robotic 

vacuum cleaner judges cleaning to be complete 

and does not resume cleaning.

Cancel the mode.

2

1

Set the mode.

Main unit button

Configuration Sequence

Do not move the robotic vacuum cleaner when it is cleaning or press a button 

while it is cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to be 

complete and starts cleaning again from the beginning.

CAUTION

NOTE

1time

Summary of Contents for SR8825









































Reviews: