Operating the cleaner
_19
Operating the cleaner
03
OPERA
TING
THE
CLEANER
INSTALLATION ORDER
1. Turning the Power Switch on or off
To use the robotic vacuum cleaner, you must turn on the Power Switch at the
bottom of the main unit.
2. Installing the Charger
To charge the robotic vacuum cleaner, you must first install
the charger.
Since the battery is discharged when the product is
purchased, you must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the
robotic vacuum cleaner.
INSTALLING THE ROBOTIC VACUUM CLEANER
TURNINg ThE POWER SWITCh ON OR OFF
CAUTION
If the Power Switch is turned off, the robotic vacuum cleaner will not be charged
even if it is docked with the charger station.
To use the robotic vacuum cleaner, you must turn the
Power Switch on.
If you turn the Power Switch off, all settings will be reset.
1. Turn over the main unit and turn the Power Switch
on.
- If the icons are not turned on, it indicates that the battery
charge is depleted. In this case, dock the robotic vacuum
cleaner to the charger station after turning the Power
Switch on.
- Note that turning the Power Switch off will reset all
settings.
- When no key is pressed for approximately 10 minutes
when the power is on, the power is automatically turned off to save battery power. In
this case, to use this robotic vacuum cleaner again, please push the “Power” button
or “Start/Stop” button.