12
Ins
tallation
Installation
Power of the charger must be on at all times.
Install it in a place without
obstacles and danger of falling.
NOTE
• Install the charger in a place where the floor and wall are level.
• Install the charger along the grain of wooden floors.
• If the power switch is off, the robot vacuum cleaner will not charge even if it is docked
on the charger.
• Always turn on the power of the charger.
– If power is not supplied to the charger, the robot vacuum cleaner cannot find it and
cannot automatically recharge.
– If the robot vacuum cleaner is left detached from the charger, the battery will drain
naturally.
• If the robot vacuum cleaner is in energy-saving mode, power will not come on even if
the power switch is turned off and then on. Press and hold the Start/Stop button on the
robot vacuum cleaner.
Power lamp
(Red)
About 1 m
About 0.5 m
About 0.5 m
Installation
VR5000_EN_00734A-00.indd 12
2015-02-27 오후 5:53:57
