Samsung SPH-T100 Series, User Manual

Page: 36 / 148

%JCTIKPIVJG$CVVGT[
Note: Only use Samsung-approved chargers. These chargers are
designed to maximize battery life. Using other chargers will
invalidate your warranty and may cause damage as well.
You can tell whether or not your battery needs to be recharged
by checking the
indicator (it’s located in the upper-right
corner of the display). The presence of all three bars indicates a
full charge, two bars indicates a smaller charge, and one bar
indicates an even smaller charge. No bars (the battery icon is
empty) means your battery must be charged.
When the battery charge level is almost empty, the battery
sensor blinks an empty battery icon (
) and sounds a tone.
6JG'ORV[$CVVGT[+EQP
Two to three minutes before the battery charge level gets too
low to operate the phone, the battery sensor will let you know
by blinking an empty battery icon (
), sounding a tone,
and displaying a warning message. If you continue to operate
the phone without charging, the phone will turn off
automatically (after the two to three minute delay). If this
happens, your wireless call will be ended. But if you plug into a
charging device, you can continue your call. Be sure to monitor
the battery strength icon and make sure your battery is
adequately charged.