Storing Pauses in a Phone Book Entry
To store a number in your Phone Book that contains
pauses:
1. Enter the phone number you want to store (such as
the bank’s tele-service phone number).
2. Press the
MENU
key.
The letter “p” displays in the number, meaning that a
hard pause will occur at that point in the dialing
sequence.
N o t e :
The digits before the “p” dial the tele-serv i c e .
The “p” stops the dialing and waits for the tele-
s e rvice to prompt you for a number. The number
following the “p” is your account number, PIN, etc.
3. Enter the digits that need to follow the pause (such as
your account number).
4. Store the number in your Phone Book as you normally
would by pressing the
OK
key and following the
screen prompts.
17
Call Functions
16
Call Functions
Pause Dialing from a Stored Phone Book Entry
1. Dial the number from the Phone Book.
2. Wait for the appropriate prompt for the number (credit
card number, bank account number, etc.).
3. When prompted, press the
TALK
key to send the
DTMF number that follows your hard pause.
“SENDING DTMF” flashed on the display and the
transmitted tone sounds.
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
connect to (such as a bank’s tele-service phone
number).
2. Press the
MENU
key to insert a pause.
The phone displays a “p” meaning a pause. Enter the
number to be sent after the pause and then press the
TALK
k e y.
3. After connecting, press the
TALK
key again to
transmit the additional number at the prompt from the
tele-service.
