![background image](http://html.mh-extra.com/html/samsung/sph-a513-fin/sph-a513-fin_user-manual_1189323059.webp)
Understanding CONTACT
59
Editing an Existing Contact
6.
Press
to backspace and delete digits or letters.
7.
Press and hold
to clear the entire number or name in the highlighted
field.
Note:
You can also add numbers (such as an Office number or a Fax number) to the entry, assign it to a
Group, and add other information. (See
“Adding a New Contact”
on page 51 for more information.)
8.
When you’re finished editing the Contact, press the
key to save your
changes.
Adding Pauses to Contact Numbers
When you call automated systems (like banking services), you are often required to
enter a password or account number. Instead of manually entering the numbers
each time, you can store the numbers in your Contacts along with special characters
called pauses.
•
Pause
— A hard pause stops the calling sequence until further input from you.
•
2sec Pause
— A two-second pause stops the calling sequence for two seconds
and then automatically sends the remaining digits.
Tip:
You can enter multiple two-second pauses to extend the length of a pause. For example, two
consecutive two-second pauses cause a total pause time of four seconds.
Note:
Keep in mind that pauses count as digits towards the 32-digit maximum.
Store Pauses in a New Contact
1.
Add a new Contact (See
“Adding a New Contact”
on page 51 for more
information).
2.
Use the Up and Down navigation keys to highlight a number for this
Contact.
3.
Press the
Pause
(left) soft key (
) to add a hard pause (awaits input
from you) to the number.
Press the
2sec Pause
(right) soft key (
) to add a two-second pause to
the number.
4.
When you’re finished entering the number and pauses, and other Contact
information, press the
key to save the new Contact.