28_
network connection and setup
network connection and setup
J
For the security purposes, you are recommended to use a combination of numbers, alphabets
uppercase and lowercase and special characters for your password.
If you want to change the password, refer to “
Administrator password change
” of the user
setup. (page 81)
6.
Click [
OK
].
Manual network setup will be completed.
If the Broadband router has network video encoder connected
Configure the IP related settings and the Port related settings distinctly with each other.
Category
CH 1
CH 2
CH 3
CH 4
IP related
settings
IP Address
Subnet Mask
Gateway
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.101
255.255.255.0
192.168.1.1
192.168.1.102
255.255.255.0
192.168.1.1
192.168.1.103
255.255.255.0
192.168.1.1
Port related
settings
HTTP Port
VNP Port
8080
4520
8081
4521
8082
4522
8083
4523
M
If the <
HTTP Port
> is set other than 80, you must provide the <
Port
> number in the address bar
of the Internet browser before you can access the network video encoder.
ex) http://IP address : HTTP Port
http://192.168.1.100:8080
Auto Network Setup
Run <
IP Installer_v2.XX.exe
> to display the network device search list.
At the initial startup, both [
Auto Set
] and [
Manual Set
] will be grayed out.
M
For network devices found with the IPv6 setting, these buttons will be grayed out as the network
devices do not support this function.
1.
Select a network device from the
search result.
Check the MAC address of the device
on the network device’s label.
Both the [
Auto Set
] and [
Manual Set
]
buttons will be activated.
