background image

9.  Acceptance not required for Having Copies. 

You are not required to accept this License in order to receive or run a copy of the 

Program. Ancillary propagation of a covered work occurring solely as a consequence 

of using peer-to-peer transmission to receive a copy likewise does not require 

acceptance. However, nothing other than this License grants you permission to 

propagate or modify any covered work. These actions infringe copyright if you do 

not accept this License. Therefore, by modifying or propagating a covered work, you 

indicate your acceptance of this License to do so. 

10.  Automatic Licensing of Downstream recipients. 

Each time you convey a covered work, the recipient automatically receives a license 

from the original licensors, to run, modify and propagate that work, subject to this 

License. You are not responsible for enforcing compliance by third parties with this 

License. 
An “entity transaction” is a transaction transferring control of an organization, 

or substantially all assets of one, or subdividing an organization, or merging 

organizations. If propagation of a covered work results from an entity transaction, 

each party to that transaction who receives a copy of the work also receives whatever 

licenses to the work the party's predecessor in interest had or could give under the 

previous paragraph, plus a right to possession of the Corresponding Source of the 

work from the predecessor in interest, if the predecessor has it or can get it with 

reasonable efforts. 
You may not impose any further restrictions on the exercise of the rights granted or 

affirmed under this License. For example, you may not impose a license fee, royalty, 

or other charge for exercise of rights granted under this License, and you may not 

initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any 

patent claim is infringed by making, using, selling, offering for sale, or importing the 

Program or any portion of it. 

11. patents. 

A “contributor” is a copyright holder who authorizes use under this License of the 

Program or a work on which the Program is based. The work thus licensed is called 

the contributor's “contributor version”. 
A contributor's “essential patent claims” are all patent claims owned or controlled 

by the contributor, whether already acquired or hereafter acquired, that would be 

infringed by some manner, permitted by this License, of making, using, or selling 

its contributor version, but do not include claims that would be infringed only as 

a consequence of further modification of the contributor version. For purposes of 

this definition, “control” includes the right to grant patent sublicenses in a manner 

consistent with the requirements of this License. 
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license 

under the contributor's essential patent claims, to make, use, sell, offer for sale, 

import and otherwise run, modify and propagate the contents of its contributor 

version. 
In the following three paragraphs, a “patent license” is any express agreement or 

commitment, however denominated, not to enforce a patent (such as an express 

permission to practice a patent or covenant not to sue for patent infringement). 

To “grant” such a patent license to a party means to make such an agreement or 

commitment not to enforce a patent against the party. 
If you convey a covered work, knowingly relying on a patent license, and the 

Corresponding Source of the work is not available for anyone to copy, free of charge 

and under the terms of this License, through a publicly available network server or 

other readily accessible means, then you must either (1) cause the Corresponding 

Source to be so available, or (2) arrange to deprive yourself of the benefit of the 

patent license for this particular work, or (3) arrange, in a manner consistent with the 

requirements of this License, to extend the patent license to downstream recipients. 

“Knowingly relying” means you have actual knowledge that, but for the patent license, 

your conveying the covered work in a country, or your recipient's use of the covered 

work in a country, would infringe one or more identifiable patents in that country that 

you have reason to believe are valid. 
If, pursuant to or in connection with a single transaction or arrangement, you convey, 

or propagate by procuring conveyance of, a covered work, and grant a patent license 

to some of the parties receiving the covered work authorizing them to use, propagate, 

modify or convey a specific copy of the covered work, then the patent license you 

grant is automatically extended to all recipients of the covered work and works based 

on it. 
A patent license is “discriminatory” if it does not include within the scope of its 

coverage, prohibits the exercise of, or is conditioned on the non-exercise of one 

or more of the rights that are specifically granted under this License. You may not 

convey a covered work if you are a party to an arrangement with a third party that is 

in the business of distributing software, under which you make payment to the third 

party based on the extent of your activity of conveying the work, and under which the 

third party grants, to any of the parties who would receive the covered work from you, 

a discriminatory patent license 
a)  in connection with copies of the covered work conveyed by you (or copies made 

from those copies), or 

b)  primarily for and in connection with specific products or compilations that contain 

the covered work, unless you entered into that arrangement, or that patent license 

was granted, prior to 28 March 2007. 

Nothing in this License shall be construed as excluding or limiting any implied license 

or other defenses to infringement that may otherwise be available to you under 

applicable patent law. 

12. no Surrender of others' freedom. 

If conditions are imposed on you (whether by court order, agreement or otherwise) 

that contradict the conditions of this License, they do not excuse you from the 

conditions of this License. If you cannot convey a covered work so as to satisfy 

simultaneously your obligations under this License and any other pertinent obligations, 

then as a consequence you may not convey it at all. For example, if you agree to 

terms that obligate you to collect a royalty for further conveying from those to whom 

you convey the Program, the only way you could satisfy both those terms and this 

License would be to refrain entirely from conveying the Program. 

13.  use with the Gnu Affero General public License. 

Notwithstanding any other provision of this License, you have permission to link or 

combine any covered work with a work licensed under version 3 of the GNU Affero 

General Public License into a single combined work, and to convey the resulting 

work. The terms of this License will continue to apply to the part which is the covered 

work, but the special requirements of the GNU Affero General Public License, section 

13, concerning interaction through a network will apply to the combination as such. 

14. revised versions of this License. 

The Free Software Foundation may publish revised and/ or new versions of the GNU 

General Public License from time to time. Such new versions will be similar in spirit to 

the present version, but may differ in detail to address new problems or concerns. 
Each version is given a distinguishing version number. If the Program specifies that 

a certain numbered version of the GNU General Public License “or any later version” 

applies to it, you have the option of following the terms and conditions either of that 

numbered version or of any later version published by the Free Software Foundation. 

If the Program does not specify a version number of the GNU General Public License, 

you may choose any version ever published by the Free Software Foundation. 
If the Program specifies that a proxy can decide which future versions of the GNU 

General Public License can be used, that proxy's public statement of acceptance of a 

version permanently authorizes you to choose that version for the Program. 
Later license versions may give you additional or different permissions. However, no 

additional obligations are imposed on any author or copyright holder as a result of 

your choosing to follow a later version. 

15. Disclaimer of warranty. 

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED 

BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE 

COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM 

“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE 

RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. 

SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL 

NECESSARY SERVICING, REPAIR OR CORRECTION. 

Summary of Contents for SPC-6000

























































Reviews: