Samsung SPC-6000 Page 45 User Manual Download

Page: 45 / 56

GpL/LGpL SofTwAre LiCenSe

The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source

code from us for a period of three years after our last shipment of this product by sending email to [email protected]
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might

be charged.

GPL S/W

- Linux Kernel, QT, Busybox, Sysvinit, dosfstools, Uboot, Bash, initutils

LGPL S/W

- gLibc

Gnu GenerAL puBLiC LiCenSe

Version 2, June 1991

51 Franklin Street,Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.

preamble

The licenses for most software are designed to take away your freedom to share

and change it. By contrast, the GNU General Public License is intended to

guarantee your freedom to share and change free software-- to make sure the

software is free for all its users.
This General Public License applies to most of the Free Software Foundation's

software and to any other program whose authors commit to using it. (Some other

Free Software Foundation software is covered by the GNU Lesser General Public

License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price.
Our General Public Licenses are designed to make sure that you have the

freedom to distribute copies of free software (and charge for this service if you

wish), that you receive source code or can get it if you want it, that you can

change the software or use pieces of it in new free programs ; and that you know

you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny

you these rights or to ask you to surrender the rights. These restrictions translate

to certain responsibilities for you if you distribute copies of the software, or if you

modify it.
For example, if you distribute copies of such a program, whether gratis or for a

fee, you must give the recipients all the rights that you have.
You must make sure that they, too, receive or can get the source code. And you

must show them these terms so they know their rights.
We protect your rights with two steps :
(1)copyright the software, and (2)offer you this license which gives you legal

permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that

everyone understands that there is no warranty for this free software. If the

software is modified by someone else and passed on, we want its recipients to

know that what they have is not the original, so that any problems introduced by

others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish

to avoid the danger that redistributors of a free program will individually obtain

patent licenses, in effect making the program proprietary. To prevent this, we

have made it clear that any patent must be licensed for everyone's free use or

not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.

TermS AnD ConDiTionS for CopyinG,

DiSTriBuTion AnD moDifiCATion

51 Franklin S

This License applies to any program or other work which contains a notice

placed by the copyright holder saying it may be distributed under the terms of

this General Public License.

The "Program", below, refers to any such program or work, and a "work based on

the Program" means either the Program or any derivative work under copyright law

: that is to say, a work containing the Program or a portion of it, either verbatim or

with modifications and/or translated into another language. (Hereinafter, translation

is included without limitation in the term "modification".) Each licensee is addressed

as "you".

Activities other than copying, distribution and modification are not covered

by this License ; they are outside its scope. The act of running the Program is

not restricted, and the output from the Program is covered only if its contents

constitute a work based on the Program (independent of having been made by

running the Program). Whether that is true depends on what the Program does.

You may copy and distribute verbatim copies of the Program's source code

as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and

disclaimer of warranty; keep intact all the notices that refer to this License and

to the absence of any warranty ; and give any other recipients of the Program a

copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may

at your option offer warranty protection in exchange for a fee.

You may modify your copy or copies of the Program or any portion of it,

thus forming a work based on the Program, and copy and distribute such

modifications or work under the terms of Section 1 above, provided that you

also meet all of these conditions :

a) You must cause the modified files to carry prominent notices stating that you

changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or

in part contains or is derived from the Program or any part thereof, to be

licensed as a whole at no charge to all third parties under the terms of this

License.

c) If the modified program normally reads commands interactively when

run,you must cause it, when started running for such interactive use in

the most ordinary way, to print or display an announcement including an

appropriate copyright notice and a notice that there is no warranty (or else,

saying that you provide a warranty) and that users may redistribute the

program under these conditions, and telling the user how to view a copy

of this License. (Exception:if the Program itself is interactive but does not

normally print such an announcement, your work based on the Program is

not required to print an announcement.)

Summary of Contents for SPC-6000

























































Search results

Summary of Contents for SPC-6000

Reviews:

Related manuals for SPC-6000

Brands by name

Popular brands

Samsung SPC-6000, User Manual

Search results

Summary of Contents for SPC-6000

Reviews:

Related manuals for SPC-6000

Brands by name

Popular brands