Samsung SP50L3HXX/XEC, Service Manual, Page: 5 / 88

Alignment and Adjustments
Samsung Electronics 2-1
2-1 When Entering Service Mode:
2-1-1 Service Mode Entry Method
1. Turn off the power to make the SET STAND-BY mode.
2. In order to enter the Service Mode, Press "INFO"
→
"MENU”
→
"MUTE"
→
"POWER" button on the Remote
Control.
In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
2-1-2 Initial DISPLAY State in times of SERVICE MODE Switch overs
2-1-2(A) OSD DISPLAY
2-1-2(B) BUTTONS OPERATIONS WITHIN SERVICE MODE
2. Alignment and Adjustments
MENU Full Menu Display / Move to Parent Menu
Direction keys
▲
/
▼
Item Selection by Moving the Cursor
Direction keys
◀
/
▶
Data Increase/Decrease for the Selected Item
Source Cycles through the active input source that are connected to the unit
Factory
1. ASI510 (MAIN) 10. DDP1011
2. ASI510 (SUB) 11. LNA PLUS
3. VPC3230 (MAIN) 12. DDP PATTERNS
4. VPC3230 (SUB) 13. ASI PATTERNS
5. FLI2310 14. OPTION TABLE
6. MTS9883 15. CHECK SUM
7. DNIe 16. RESET
8. CCA
9. SP ACTUATOR