manualshive.com logo in svg

Samsung SP-R5200, User Manual

Share
Download
Samsung SP-R5200 User Manual Download Page 25

49

Digital Cordless Telephone

48

Digital Cordless Telephone

• Clean the charging points.

• Consistently short battery life may

indicate
that replacement of the batteries is
necessary.

Tr o u b l e s h o o t i n g

Symptom

No operation

No dial tone

Warning beep
occurs when
making a call. 

The handset
seems to have
very short bat-
tery life.

Check

• Check that the power adapter is prop-

erly connected.

• Check that the telephone line cord is

properly connected.

• Check that the handset is fully
charged.

• Check that the handset batteries are

installed properly.

• Check that the handset is not too far

from the base.

• Check that the handset batteries are

not in low status.

• Check that the telephone line cord is

properly connected.

• Check that the power adapter is prop-

erly connected.

To Select the Base Unit Manually

You can select a base unit through which you want your 
handset to operate.

1. Press 

or 

button repeatedly until 

appears in the display.

2. Press 

button. 

Result:

The display shows the currently selected base number.

3. Press 

or 

button repeatedly to choose the desired base

unit. 

4. Press 

button to confirm.

Summary of Contents for SP-R5200



























Reviews:

No comments

Brands by name

Popular brands

Load more brands