background image

22

Digital Cordless Telephone

23

Digital Cordless Telephone

Caller ID is a feature available on your phone which helps you
to know who is calling by displaying the caller’s number when
the phone rings. Contact your service provider to activate this
feature. 

Notes:

• If there is a missed call (the call not answered), the missing

call number appears in the display.

Your phone keeps track of the last 10 calls received. Refer to
‘Call Log’ on page 29 to check and dial the numbers.

• If a caller has chosen to withhold their number,

is displayed.

• If a caller’s number is not available, you will see

in the display.

• Your Samsung DECT phone has been equipped to receive Caller

Line Identification Presentation or CLIP features that allow you
to see the phone number of the person calling before answer-
ing the call.
The CLIP system used on this product is compatible with the
service currently provided by British Telecom and the majority
of independent Network providers.
In order to use this facility you may have to subscribe to the
service and you should contact your Network provider for infor-
mation on availability and compatibility of this service with
your Network.

Out of Range Indication

Caller ID Display

If the handset is too far from the base unit, the handset can-
not properly engage the telephone line, and the 

icon

blinks in the LCD window.

If you move out of range during a call, the telephone line
might be disconnected and the handset returns to Standby
mode. Check if the icon blinks in the LCD window. If so, move
the handset closer to the base unit.

This icon blinks when the handset is out
of range in the standby mode.

This icon blinks when the

phone rings.

A

icon is continuously displayed in the upper line of the

LCD window. The 

icon shows the level of your battery.

The more bars you see, the more power you have left.  

When the battery is weak and a few minutes of talk time
remain, you will hear a warning tone and the 

icon blinks. 

When the battery becomes too weak for the phone to operate,
the handset will automatically turn off. Place the handset on
the base unit to charge the handset batteries.

Battery Level Indicator

Full                               Flat

the caller’s number

There are two missed calls.

Summary of Contents for SP-R5200



























Reviews: