Samsung SP-C802R, User Manual

Page: 20 / 30

37 36
Pause during calls (Hold function)
Advanced Functions Available during Calls
Holding tone is
transmitted to the
other party.
Busy
To resume the call
When using the handset
To resume the call
When placing the handset
Pick up the handset or
press button.
�
�
�
�
�
;;
;;
@@
@@
€€
€€
ÀÀ
ÀÀ
To hold during a call, press button.
To resume the call, press button again.
When the remote set is busy
● If the other party does not
pick up the phone even after
�
3 minutes
�
, the holding
tone is automatically
disconnected.
Advanced Functions for Auto Answering
1. Voice message record time
(Time when the message is recorded by the callers)
●
The time allowed for the caller to leave a message on the auto answering machine is 3 minutes.
●
Correct date and time at which the message is left is announced only when the date and time is set
in the unit.
2. Auto Answering Ring Count
(Ansewring Ring Count : The number of rings before
the unit switches to auto answering mode when there
is an incoming call)
● The auto-answering bell count can be setup respectively for both auto-answering on and off.
Functions used for Auto Answering
When the caller is leaving
a message in the auto
answering mode, you can
hear his or her voice
through the speaker.
These functions are set as
default when the auto
answering function is used.
� � �
●
If the caller does not speak a word for 10 seconds for recording on the auto answering
machine, the call is automatically terminated.
Checking the caller
’
s voice
(Caller Identification)
Setting the caller
identification
� � �
Canceling the caller
identification
� � � �
Confirming the caller
identification