background image

16

17

The selected
ringer sounds.

3 4 

The current ringer
sounds.

Press       to       to listen to the

ringers, and select the desired

number.

Select        to off the bell sound of

both base and handset units. Only

LED flicker.

There are 10 types of ringers.

Adjusting the speaker volume

(In the speakerphone state)

To reduce

To increase

You can adjust the volume in 4 levels.

Adjusting the handset volume 

(In the handset call state)

1 2 

Selecting the ringer type

벨소리 크기 조절

Press the buttons in the following order.

When the telephone rings, you can adjust the ringer volume with                                   button.

If you adjust the speaker volume in the standby state, you can control it in 7 levels. 
(You can control the volumes of announcement tone and regeneration tone.)

To reduce

To increase

You can adjust the volume in 4 levels.

Make it sure to adjust the
tone with the handset on the
base set.

Press the button
in the standby
state.

Adjusting the ringer volume

1 2 3

5

4

You can set the volume in 3 levels of High, Middle and Low.

At the time of purchase, it is set to Middle.

Press        to        and

select the desired

volume. 

Selecting the base set ringer type

Summary of Contents for SP-C802R































Reviews: