Samsung SP-C801RBL Manual Download Page 15

Page: 15 / 23

Speed dial for Remote set

If you setup the speed dial,
you can make calls just by
pressing the speed dial
number.

To program the speed dial (in standby mode)

To call using the speed dial number

Press button.

●

You can press the button and the speed dial number in standby mode to make the call.

※

For the phone number to be programmed into the phone, it has to be no more than 20 digits.

�

Enter the phone number

To record

The recording will
automatically stop
when you hang up
the call.

To stop

To playback the

recorded call

Play back the recorded call and press button while playing it.

To playback the recorded call,

press button in standby mode and to delete the recorded call, press button during playback.

Recording calls (base set)

You can record and play
back a call.

To delete the recorded call

To delete the speed dial number

(in standby mode)

�

Select the speed dial
number to check from

to .

To check the speed dial number

(in standby mode)

●

You cannot record a call while using the speakerphone.

●

If you want to cancel during the procedure, press button.

;;

ÀÀ

During a call

In standby

mode

�

Press the speed dial
number to dial.

You will see the

phone number on the

screen.

Select the speed dial
number from to .

Select the speed dial
number to check from

to .

Convenient features for making calls

Convenient features during calls

Convenient features

Summary of Contents for SP-C801RBL
























Search results

Summary of Contents for SP-C801RBL

Reviews:

Related manuals for SP-C801RBL

Brands by name

Popular brands

Samsung SP-C801RBL, Manual

Search results

Summary of Contents for SP-C801RBL

Reviews:

Related manuals for SP-C801RBL

Brands by name

Popular brands