23
22
Auto answering
(continued)
●
Press and hold down
until you hear a
beep.
●
Record your voice (your ongoing message).
(25 seconds)
●
Press the Play/stop
button to end the
recording.
●
It will then repeat the
ongoing message once.
●
This is used only in the base set.
You will then hear a beep
tone along with a recorded
voice.
To end
▶
If you have not recorded your voice, it will play the default message in the phone.
▶
This means that the message is too short (less then 3 seconds).
In this case, please try again.
▶
If the quality of the recorded voice is not good, it thus means
that you have recorded either too close to or too far away from
the mike. Try to keep about 30 cm from the mike.
Selecting an active message from some recorded messages.
1 2
3
4
;;;
;;;
@@@
@@@
ÀÀÀ
ÀÀÀ
;;
@@
ÀÀ
I am not
available
Please call
around 8.
When the recording does not work
To record your voice for auto-answering (in standby mode)
��
If you press button shortly after recording your voice, the
message will be selected as shown.
Designated message
on phone
Directly recorded
message
Mike
Basic features
