Samsung SP-65W3HF, Owner'S Instructions Manual

Page: 13 / 44

13
ENG
Plug & Play Feature
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER button on
the remote control.
Result: The message
PLUG & PLAY
is displayed. It flickers for a
little while and then the
LANGUAGE
menu is automatically
displayed.
2
Move the joystick up or down to select required language. Press
the
MENU button to enter the language, and then the message
ANT. INPUT : CHECK
is displayed.
➣
If any language is not selected on the
LANGUAGE
menu, the
LANGUAGE
menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And move the
joystick left or right.
Result: The
AUTO STORE
menu is displayed.
4
Select your country by moving the joystick left or right. To search
the channels, select the
SEARCH
by moving the joystick up or
down, and then move the joystick left or right (refer to “Storing the
Channels Automatically” on page 17). Press the
MENU button to
skip.
Result: The
TIME
menu is displayed.
5
Move the joystick left or right to move to the hour or minute. Set the
hour or minute by moving the joystick up or down (refer to “Setting
and Displaying the Current Time” on page 32).
6
When you have finished, press the MENU button.
Result: The message
ENJOY YOUR WATCHING
is displayed,
and then the channel which has been stored will be
activated.
PLUG & PLAY
ANT. INPUT : CHECK
SELECT EXIT
AUTO STORE
AREA : AUSTRALIA
SEARCH : -/+
SELECT ADJUST EXIT
TIME
CLOCK : -- : -- AM
TIMER : OFF
SELECT ADJUST EXIT
ENJOY YOUR WATCHING
SELECT ENTER
LANGUAGE
ENGLISH
:
n
n
).
01772A-03_AUS 7/10/06 2:28 PM Page 13